BREAKING! RFK Jr. Polling at 19% against Biden

Days...

because it can be controlled...





Here are some methods that can be used to control the burn rate of thermite:

  1. Composition: The burn rate of thermite can be adjusted by changing the ratio of the metal powder to metal oxide in the thermite mixture. Using a higher ratio of metal powder to metal oxide can increase the burn rate while using a lower ratio can decrease the burn rate.
  2. Particle size: The burn rate of thermite can also be controlled by adjusting the particle size of the reactants. Using smaller particle sizes can increase the burn rate while using larger particle sizes can decrease the burn rate.
  3. Packing density: The burn rate of thermite can also be adjusted by changing the packing density of the thermite mixture. Increasing the packing density can increase the burn rate while decreasing the packing density can decrease the burn rate.
  4. Ignition: The burn rate of thermite can be controlled by adjusting the ignition method. Using a faster ignition method, such as an electric spark, can increase the burn rate, while using a slower ignition method, such as a flame, can decrease the burn rate.
  5. Surrounding conditions: The burn rate of thermite can also be affected by the surrounding conditions, such as temperature, humidity, and pressure. If the thermite is exposed to high humidity, the burn rate may decrease, while if it is exposed to low humidity, the burn rate may increase.
It is important to note that controlling the burn rate of thermite can be difficult and require a good understanding of the properties of the thermite mixture and the surrounding conditions. It is also important to have proper safety equipment, such as heat-resistant gloves and goggles, when handling thermite to be prepared in case of an emergency.
No mention of burn time

Massive failure for you try again
'

You have failed to answer the question and are attempting to dodge and weave no answeer the question COWARD
 
Days...

because it can be controlled...





Here are some methods that can be used to control the burn rate of thermite:

  1. Composition: The burn rate of thermite can be adjusted by changing the ratio of the metal powder to metal oxide in the thermite mixture. Using a higher ratio of metal powder to metal oxide can increase the burn rate while using a lower ratio can decrease the burn rate.
  2. Particle size: The burn rate of thermite can also be controlled by adjusting the particle size of the reactants. Using smaller particle sizes can increase the burn rate while using larger particle sizes can decrease the burn rate.
  3. Packing density: The burn rate of thermite can also be adjusted by changing the packing density of the thermite mixture. Increasing the packing density can increase the burn rate while decreasing the packing density can decrease the burn rate.
  4. Ignition: The burn rate of thermite can be controlled by adjusting the ignition method. Using a faster ignition method, such as an electric spark, can increase the burn rate, while using a slower ignition method, such as a flame, can decrease the burn rate.
  5. Surrounding conditions: The burn rate of thermite can also be affected by the surrounding conditions, such as temperature, humidity, and pressure. If the thermite is exposed to high humidity, the burn rate may decrease, while if it is exposed to low humidity, the burn rate may increase.
It is important to note that controlling the burn rate of thermite can be difficult and require a good understanding of the properties of the thermite mixture and the surrounding conditions. It is also important to have proper safety equipment, such as heat-resistant gloves and goggles, when handling thermite to be prepared in case of an emergency.



It doesn't say days anywhere in your link. Thermite burn rates are very fast, in welding they do indeed slow the burn rate down so that it can get better depth of penetration, but it is still measured in minutes, not days.

Nice attempt to lie there, sport. Now, post up a link where it says thermite can burn for days.
 
No mention of burn time

Massive failure for you try again
'

You have failed to answer the question and are attempting to dodge and weave no answeer the question COWARD


Controlling the burn rate = controlling how long it burns

DUH
 
It doesn't say days anywhere in your link. Thermite burn rates are very fast, in welding they do indeed slow the burn rate down so that it can get better depth of penetration, but it is still measured in minutes, not days.

Nice attempt to lie there, sport. Now, post up a link where it says thermite can burn for days.



The video linked earlier from Engineers for 911 Truth documents it...
 
No debates say Democrats.
It was back in 2016 that Democrats had the fix in for Hillary. That might be getting old, even for Democratic voters. For the party who claims they want free and fair elections and claim to be against vote suppression, they seem to like rigging things to suppress democracy.
 
Controlling the burn rate = controlling how long it burns

DUH
Which does not answer the question DUH DUH DUH

The plus or minus rate of control is NOT MEASURED In days but in minutes now answer the question

You are lying and dodging

Answer up
 
Huh?...you mean this is drunk kennedy who plowed a 98 in a pond and let a girl drown?


Teddy was JFK's brother, as was RFK. RFKjr is a nephew of Teddy.

Teddy was the "Liberal Lion" of the Senate who drowned Mary Jo. JFK and RFK were more moderate. JFK would be called a "conservative" today. All the big spending big government started with LBJ.
 
Which does not answer the question DUH DUH DUH

The plus or minus rate of control is NOT MEASURED In days but in minutes now answer the question

You are lying and dodging

Answer up


Maybe in the Mossad propaganda room.

If you can control the burn rate, you can make it burn however long you want...
 

Even if Tater manages to squeak out another nomination, the higher RFK goes against him, the more democrats that will refuse to vote for Tater in the general, and that's a good thing. They managed to pay off Bernie to keep him quiet, I wonder what they'll do to this guy.
 
Maybe in the Mossad propaganda room.

If you can control the burn rate, you can make it burn however long you want...
Wrong MORON

Stop lying and answer the question

NO it does NOT mean as LONG as you want it still has limits now stop running away you little coward
 
The video linked earlier from Engineers for 911 Truth documents it...


Provide a published link that says thermite can burn for days.

You can't, because it doesn't exist. Thermote burns fast. That's how it works.
 

Forum List

Back
Top