Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature may not be available in some browsers.
Also from the above link:
"In addition to cutting through the walls, officials told the Post that smugglers have also repeatedly scaled and climbed over the walls with makeshift ladders, particularly in areas near San Diego."
I guess that, Mexicans have learned to use ladders. Who could have known?
Put up a 30 foot wall and 31 foot ladders go on sale.
If man made it, man can break it. I believe most of us realize that a wall itself isn't all that is needed. A bipartisan comprehensive reform of immigration by Congress is needed as well. Hell, if it was good it is likely no wall would be needed possibly. Alas, Congress will never come together to reform immigration laws.
Here is the vocabulary problem
When I say that we need a barrier along with a wall in some places, electronic sensors, more border guards here is what the Rumpsters hear.
"We need a Wall along a Wall in some places, Wall, more wall". And we are going to build it in Colorado and make New Mexico pay for it.
The “vocabulary problem” is with the ignorant twisted Leftists which we know you profess not to be..,haha
Anyhoo...when I say MITIGATION effort the dumbmotherfuckers say “huh, what’s mitigation...a wall won’t / can’t act as a functional mitigation measure.”
The dumbmotherfuckers honestly believe that the trillions of linear feet of wall built worldwide doesn’t function as intended...the dumbmotherfuckers honestly believe that wall / fence manufacturers / contractors never should have existed.
The Dems have always suggested alternative methods like Security Fencing (look up what one is), electronic measures and more boots on the ground. The funds for finishing the projected 1000 miles of Security Fencing/Wall was already allocated. Bush Jr built over 140 miles of it. The rest of the 733 miles was done under Obama. And that is new construction, not repair or replacement. In the last 3 years, are you aware that there has been between 1.3 and 1.43 billion a year allocated for repair, replacement and new construction and there has been zero inches of new construction. The other Presidents did an average of 74 miles a year of new construction on top of repair and replacement using the allocated 1.3 billion. Rump has barely been doing the repair and replacement. But he has done zero miles of new construction. Every time one of you fruitcakes claim that it's new construction it turns out that it was a repair and/or replacement of an existing structure. That leaves a few hundred million dollars unaccounted for. The only question comes up, where did the money go? The answer is, yes, Rump is running the Nation like he ran his businesses. Rump Steaks, Rump Airlines, Rump ......... He doesn't need any money stolen from the Military, what he needs is a good audit.
Wow they really do hate our countryLeave it to a bed wetting liberal parasite to cheer the destruction of US Taxpayer property by criminal trespassers.
You are naive. The article is nothing but KGB style crude defamatory anti-USA disinformation. The pencil-necked unproductive leeches on society at anti-USA propaganda outlets such as the Washington Post and NBC have written similar bullshit stories....with a power tool retailing for $100.
Smugglers are reportedly cutting holes in Trump’s newly constructed border wall with saws and power tools
How could anyone be surprised about this?
I'm a career cement mason and ironworker who has been in the concrete construction business for decades and have cut enough concrete filled bollards to know what tools to use to do the job. I've also seen the aftermath of people who have wasted their time, money and sweat attempting to cut them with the wrong tools (including a common cheap reciprocating saw) before they called a professional (me) to get the job done.
First off, I'll tell you that yes indeed you can cut them with a ~$100 reciprocating saw that can be commonly found in a DIYer's garage or basement. I've witnessed a local business owner make some slow progress using one.
Frustrated, he gave up and called me to get rid of them because after hours of toil in the hot sun and burning up several pricey Sawzall blades he wasn't even close to halfway through it. He was making progress but it was slow going, so he just figured that he would burn through several hundred dollars worth of blades just cutting one of them. And he had two of them he wanted to get rid of.
In my professional expert opinion, I rate the claim that you can cut through the new border wall bollards in mere minutes with a common household reciprocating saw to be complete and utter bullshit. 5 cow patties.
I also know the likely origin and evolution of this fake news story. While performing destructive testing of the wall prototypes the border patrol found that they could cut the bollards with a saw that is commonly sold/rented at construction contractor supply outlets. The USA hating Democrat media then lied and said they cut it with a common household saw just to denigrate the USA. Then idiots who were so ignorant that they bought that lie speculated that it must have been an electric reciprocating saw.
You are naive. The article is nothing but KGB style crude defamatory anti-USA disinformation. The pencil-necked unproductive leeches on society at anti-USA propaganda outlets such as the Washington Post and NBC have written similar bullshit stories....with a power tool retailing for $100.
Smugglers are reportedly cutting holes in Trump’s newly constructed border wall with saws and power tools
How could anyone be surprised about this?
I'm a career cement mason and ironworker who has been in the concrete construction business for decades and have cut enough concrete filled bollards to know what tools to use to do the job. I've also seen the aftermath of people who have wasted their time, money and sweat attempting to cut them with the wrong tools (including a common cheap reciprocating saw) before they called a professional (me) to get the job done.
First off, I'll tell you that yes indeed you can cut them with a ~$100 reciprocating saw that can be commonly found in a DIYer's garage or basement. I've witnessed a local business owner make some slow progress using one.
Frustrated, he gave up and called me to get rid of them because after hours of toil in the hot sun and burning up several pricey Sawzall blades he wasn't even close to halfway through it. He was making progress but it was slow going, so he just figured that he would burn through several hundred dollars worth of blades just cutting one of them. And he had two of them he wanted to get rid of.
In my professional expert opinion, I rate the claim that you can cut through the new border wall bollards in mere minutes with a common household reciprocating saw to be complete and utter bullshit. 5 cow patties.
I also know the likely origin and evolution of this fake news story. While performing destructive testing of the wall prototypes the border patrol found that they could cut the bollards with a saw that is commonly sold/rented at construction contractor supply outlets. The USA hating Democrat media then lied and said they cut it with a common household saw just to denigrate the USA. Then idiots who were so ignorant that they bought that lie speculated that it must have been an electric reciprocating saw.
Now that you mention it, first you will need a hammer drill with a carbide bit..
And a bunch of batteries
Leave it to a bed wetting liberal parasite to cheer the destruction of US Taxpayer property by criminal trespassers.
Don't think he's cheering just proving a point what most people said all along "Where there's a will, there's a way"
Here's the thing...
NO ONE....
Not one person EVER CLAIMED "the wall" would be impenetrable, the "fool proof solution" or all we need to stop illegal entry.
It has always been acknowledged that in addition to an efficient barrier we need people and technology to make illegal entry as difficult as possible.
.
Leave it to a bed wetting liberal parasite to cheer the destruction of US Taxpayer property by criminal trespassers.
Don't think he's cheering just proving a point what most people said all along "Where there's a will, there's a way"
Here's the thing...
NO ONE....
Not one person EVER CLAIMED "the wall" would be impenetrable, the "fool proof solution" or all we need to stop illegal entry.
It has always been acknowledged that in addition to an efficient barrier we need people and technology to make illegal entry as difficult as possible.
.
How difficult is it to go through a hole in a wall?
...with a power tool retailing for $100.
Smugglers are reportedly cutting holes in Trump’s newly constructed border wall with saws and power tools
How could anyone be surprised about this?
"One factor of deterrent is electronic sensors that are yet to be added but could sense where and when the wall was damaged, triggering repairs."
They haven't finished adding all of the security measures, Dumbass! Leave it to the Washington Post to publish that garbage!
Geez!
What a surprise.
Leave it to a bed wetting liberal parasite to cheer the destruction of US Taxpayer property by criminal trespassers.
Don't think he's cheering just proving a point what most people said all along "Where there's a will, there's a way"
Here's the thing...
NO ONE....
Not one person EVER CLAIMED "the wall" would be impenetrable, the "fool proof solution" or all we need to stop illegal entry.
It has always been acknowledged that in addition to an efficient barrier we need people and technology to make illegal entry as difficult as possible.
.
How difficult is it to go through a hole in a wall?
...with a power tool retailing for $100.
Smugglers are reportedly cutting holes in Trump’s newly constructed border wall with saws and power tools
How could anyone be surprised about this?
This is how you cut bollards in minutes.You are naive. The article is nothing but KGB style crude defamatory anti-USA disinformation. The pencil-necked unproductive leeches on society at anti-USA propaganda outlets such as the Washington Post and NBC have written similar bullshit stories....with a power tool retailing for $100.
Smugglers are reportedly cutting holes in Trump’s newly constructed border wall with saws and power tools
How could anyone be surprised about this?
I'm a career cement mason and ironworker who has been in the concrete construction business for decades and have cut enough concrete filled bollards to know what tools to use to do the job. I've also seen the aftermath of people who have wasted their time, money and sweat attempting to cut them with the wrong tools (including a common cheap reciprocating saw) before they called a professional (me) to get the job done.
First off, I'll tell you that yes indeed you can cut them with a ~$100 reciprocating saw that can be commonly found in a DIYer's garage or basement. I've witnessed a local business owner make some slow progress using one.
Frustrated, he gave up and called me to get rid of them because after hours of toil in the hot sun and burning up several pricey Sawzall blades he wasn't even close to halfway through it. He was making progress but it was slow going, so he just figured that he would burn through several hundred dollars worth of blades just cutting one of them. And he had two of them he wanted to get rid of.
In my professional expert opinion, I rate the claim that you can cut through the new border wall bollards in mere minutes with a common household reciprocating saw to be complete and utter bullshit. 5 cow patties.
I also know the likely origin and evolution of this fake news story. While performing destructive testing of the wall prototypes the border patrol found that they could cut the bollards with a saw that is commonly sold/rented at construction contractor supply outlets. The USA hating Democrat media then lied and said they cut it with a common household saw just to denigrate the USA. Then idiots who were so ignorant that they bought that lie speculated that it must have been an electric reciprocating saw.
Now that you mention it, first you will need a hammer drill with a carbide bit..
And a bunch of batteries
Leave it to a bed wetting liberal parasite to cheer the destruction of US Taxpayer property by criminal trespassers.
Don't think he's cheering just proving a point what most people said all along "Where there's a will, there's a way"
Here's the thing...
NO ONE....
Not one person EVER CLAIMED "the wall" would be impenetrable, the "fool proof solution" or all we need to stop illegal entry.
It has always been acknowledged that in addition to an efficient barrier we need people and technology to make illegal entry as difficult as possible.
.
How difficult is it to go through a hole in a wall?
Show us a picture. Depending on the wall it can be a stone cold bitch. That's why without any sort of evidence, this is merely propaganda.
...with a power tool retailing for $100.
Smugglers are reportedly cutting holes in Trump’s newly constructed border wall with saws and power tools
How could anyone be surprised about this?
Leave it to a bed wetting liberal parasite to cheer the destruction of US Taxpayer property by criminal trespassers.
